Sony VPL-FX51 Mode D'emploi page 24

The INPUT SETTING Menu
SIZE H
Adjusts the horizontal size of picture input from the
INPUT A/B (analog signal only) connector.
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size
of the picture. Adjust the setting according to the dots
of the input signal.
For details on the suitable value for the preset signals, see
page 25 (GB).
SHIFT
Adjusts the position of the picture input from the
INPUT A/B (analog signal only) connectors or
VIDEO IN jacks.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to
the right, and as the setting decreases, the picture
moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the < or , key to adjust the horizontal position
and the M or m key for the vertical position.
ASPECT
Sets the aspect ratio of the picture.
When inputting 16:9 (squeezed) signal from
equipment such as a DVD player, set to 16:9.
4:3 : When the picture with ratio 4:3 is input.
16:9 : When the picture with ratio 16:9 (squeezed) is
input.
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
ON: Displays the picture according to the screen
size. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
Note
This item is displayed only when the computer signal
(except for the XGA, SXGA and UXGA signals) is
input.
.........................................................................................................................................................................................................
1) The RGB signals of a computer. INPUT C is adjustable for the same items as that of the RGB (digital) signals.
24
(GB)
Input signals and adjustable/setting items
Item
Component
Video or
S video (Y/C)
DOT –
PHASE (HDTV only) (HDTV only) (Analog
SIZE H –
(HDTV only) (HDTV only) (Analog
SHIFT
ASPECT
(480/60i,575/ (480/60i,575/
50i,480/60p, 50i,480/60p,
575/50p)
SCAN –
CONV
: Adjustable/can be set
– : Not adjustable/can not be set
About the preset memory No.
This projector has 44 kinds of preset data for input
signals (the preset memory). The memory number of
the current input signal and the signal type are
displayed when the preset signal is input. This
projector automatically detects the signal type. When
the signal is registered to the preset memory, a
suitable picture is displayed on the screen according
to the signal type. You can adjust the picture through
the INPUT SETTING menu.
This projector also has 20 kinds of user memories for
each INPUT-A/B (analog signal only). When an
unpreset signal is input for the first time, memory
number is displayed as 0. If the input signal is
adjusted in the INPUT SETTING menu, the setting
via INPUT-A/B (analog signal only) is stored. When
more than 20 user memories are registered for each
INPUT-A/B (analog signal only), the newest memory
is automatically stored over the oldest one.
Input signal
Video GBR RGB
only)
only)
(Analog
only)
–
575/50p)
– –
(lower
than
SVGA
only)
1)