Switching The Alarm Function On/Off; Setting The Alarm Time - Eurochron EFWS 91 i Mode D'emploi

g) Switching the Alarm Function On/Off
—
Briefly press the „" (11) or „" button (12) repeatedly until the display „
flashes.
—
Briefly press the button „alarm" (14) repeatedly until the desired alarm clock
function appears (see chapter 12. f).
—
The „" (11) or „" (12) buttons are used to switch the selected alarm function
on (alarm time is displayed) or off („OFF" is displayed).
For the pre-alarm (display „PRE AL") to be switched on or set, the alarm
clock function „
place.
h) Setting the Alarm Time
—
Briefly press the „" (11) or „" button (12) repeatedly until the display „
flashes.
—
Briefly press the button „alarm" (14) repeatedly until the desired alarm clock
function „ W" or „
—
Switch on the alarm clock function you just selected (press „" (11) or „"
(12)), so that the alarm time is displayed instead of „OFF" (e.g. „07:00").
—
Press the „alarm" (14) button until the hours of the alarm time start to flash.
Set the hours of the alarm time with the „" (11) or „" (12) buttons (for quick
adjustment, keep the button pressed down).
—
Briefly press the „alarm" button (14); the alarm time minutes flash.
Set the minutes of the alarm time with the „" (11) or „" (12) buttons (for
quick adjustment, keep the button pressed down).
—
Briefly press the button „alarm" (14) to terminate setting mode.
58
W" or „ S" must be set first, or no pre-alarm can take
S" appears (see chapter 12. f).
"
"