Setting The Time Zone; Select Alarm Clock Function Or View Alarm Time - Eurochron EFWS 91 i Mode D'emploi

e) Setting the Time Zone
—
Briefly press the „" (11) or „" button (12) repeatedly until the display „
flashes.
—
Briefly press the button „mode" (13) repeatedly until „ZONE" is displayed to the
right of the time.
—
Hold down the „mode" button (13) until the time zone display flashes at the
bottom („0:00+").
—
Set the time zone with the „" (11) or „" (12) buttons (for quick adjustment,
keep the button pressed down). The adjustable value is between -13 and
+15 hours (display „13:00-" to „15:00+").
—
Briefly press the button „mode" (13) to terminate setting mode.
f) Select Alarm Clock Function or View Alarm Time
—
Briefly press the „" (11) or „" button (12) repeatedly until the display „
flashes.
—
Briefly press the button „alarm" (14) repeatedly until the desired alarm time
appears:
Icon „ W": The alarm clock function is only triggered on weekdays.
Icon „ S"): The alarm function is only triggered once, then it is automatically
switched off („OFF").
Icon „PRE AL": At low outdoor temperatures below 0 °C (measured at the
outdoor sensor with channel 1), the so-called pre-alarm is triggered at a set
time (15, 30, 45, 60 or 90 minutes) before the actual alarm time. This gives you
enough time to, e.g., de-ice the windshield of your car or to clear snow.
For the pre-alarm (display „PRE AL") to be switched on or set, the alarm
clock function „ W" or „ S" must be set first.
"
"
57