Setting Temperature Value For Temperature Alarm; Trend Display For Indoor/Outdoor Temperature - Eurochron EFWS 91 i Mode D'emploi

g) Setting Temperature Value for Temperature Alarm
—
Briefly press the „" (11) or „" button (12) repeatedly until the display „
flashes.
—
Select the desired outdoor sensor with the button „channel" (15).
—
Press the „alarm" button (14) one or two times to switch between the upper
temperature limit (icon „ ") and the lower temperature limit (icon „ ").
—
Switch the respective temperature alarm on (or off) by briefly pressing the button
„" (11) or „" (12).
If the temperature alarm is switched off, „OFF" is displayed.
If the temperature alarm is activated, a temperature value is displayed.
—
Press the „alarm" (14) button until the temperature value flashes; then, release
the button again.
—
Set the temperature value with the „" (11) or „" (12) button (for quick
adjustment, keep the button pressed down).
—
Briefly press the „alarm" button (14) to store the setting and to leave the setting
mode.
h) Trend Display for Indoor/Outdoor Temperature
The arrow icons to the right of the indoor/outdoor temperature show the respective
trend of measured values:
Rising
62
Consistent Dropping
"