T'nB SPCAMWIFI Mode D'emploi page 39

Wi-Fi Mode Activation
Enable the Wi-Fi :
1 - Put your camera in Video mode
2 - Press the Wi-Fi button
3 - The display will show : «waiting for Wi-Fi connecting»
the device is waiting for a Wi-Fi signal.
The LED status indicator light blinks blue.
.. Then, to connect your smartphone :
4 - Enable the Wi-Fi function of your smartphone or tablet
5 - Download application «T'nB Cam» for Android or
iPhone.
6 - Open the Wi-Fi preferences of your smartphone,
select the signal with name : «T'nB Cam».
7 - Type the password «1234567890» to connect. When
the connection is established the blue LED status indica-
tor light stays on without blinking and the screen of the
camera turns off.
Bravo, you are connected to Wi-Fi at your camera.
From the application, you can now remotely control your
camera and watch live videos and photos !
Caution : the Wi-Fi function consumes more battery.
Note : It is possible to connect to the camera, only one device at a time.
_Notice_SPCAMWIFI_Complet.indd 39
Wi-Fi
, on the side of your camera
.
Direct activation of
Wi-Fi mode
WIFI
Network :
Application
T'nb Cam
Password :
T'nB Cam
1234567890
EN
39
30/04/2015 10:23