T'nB SPCAMWIFI Mode D'emploi page 36

Shot Mode (Photo)
To take a Photo, make sure that the camera is in Photo mode. If the Photo icon
displayed on the LCD screen of your camera, press
To take a photo :
Press
blinks for each captured shot.
Select the resolution of your photos :
Your camera can take some shots with resolution up to 5
Megapixels. You have the choice of four possible types of
resolution (Setup > Resolution).
Take several photos at once :
In «Burst» mode, your camera takes several photos in a
single click. To take a burst of photos, make sure that the
camera is in «Burst» mode (Setup > Burst). You just have to
select the number of shot that you want for a single click: 3,
5 or 10 photos.
36
_Notice_SPCAMWIFI_Complet.indd 36
PHOTO
and release the pressure. The camera emits a beep, the red status indicator light
Indicator of the chosen resolution
multiple times until it appears.
000000
000000
Activated «Photo burst»
is not
30/04/2015 10:23