Cancelling The Assignment Of Zones (Rooms) - Honeywell HCE80 Mode D'emploi

Cancelling the assignment of zones (rooms)

Cancelling the assignment of a room
setpoint generator/sensor of a zone
Keep the installation button
1
for at least 2 seconds in order to
access the installation mode.
The l LED lights up. The LED
of zone 1 flashes green.
Press the installation button
2
repeatedly until the LED of the zone
to be removed flashes red.
3 Keep the Mode button pressed
for at least 4 seconds.
The LED of the selected
zone extinguishes.
The assignment of the room setpoint
generator/sensor has been cancelled.
HCE80(R) / HCC80(R) Mounting and operation
pressed
Cancelling the assignment of the time
program (room setpoint) of a zone
Keep the installation button
1
for at least 2 seconds in order to
access the installation mode.
The
of zone 1 flashes green.
Press the installation button
2
repeatedly until the LED of the zone
to be removed flashes green.
3 Keep the Mode button pressed
for at least 4 seconds.
The LED of the selected
zone extinguishes.
The assignment of the time program
(room setpoint) has been cancelled.
LED lights up. The LED
21
pressed