Technical Data - Metz mecastudio BL-200 Mode D'emploi

13 Technical data

Flash output(controllable from P1/1 to P1/32) :
BL 200: 200 Ws
BL 400: 400 Ws
GN (ISO 100):
BL 200: 45
BL 400: 65
Flash tube:
Plug-in, can be replaced by user
Synch voltage for triggering a flash: 5 V
Flash triggering via:
internal photocell, synch cable, TEST button
Recharging time of the studio flash unit:
BL 200: 0,4 – 2,0 sec.
BL 400: 0,5 – 2,7 sec.
Flash durations: 1/800 – 1/1200 sec.
Colour temperature: 5600 K ± 200 K
Output of the modelling lamp: 75 W
Warning tone if studio flash unit overheats:
Yes
Digital display: Yes
Power supply:
90 – 250 V AC / 50 Hz
Miniature fuse: T4AL/250V
Protection category: IP 20
Dimensions in mm (W x H x D) without reflec-
tor:
123x 207 x 243
Weight (incl. protective cap and flash tube):
BL 200: 1060 g
BL 400: 1230 g
Permissible operating conditions:
-10°C to +40°C
Storage conditions:
Dry and dust-free in the original packaging
from -20 °C to +50 °C
Scope of delivery:
1 BL200 / BL400 studio flash unit with pro-
tective cap
1 reflector SR-18 (not in kit)
1 modelling lamp 75 W
1 synchronisation cable 4.5V (4m)
1 power cord (4m)
1 user guide
k
77