ACCESSING FILTER CARTRIDGES
Our various spa models use different filter systems depending on the spa design. Identify which filter system is in your
spa and check (√) it off for future reference.
XL PLUS FILTER
Four cartridges mounted vertically. Coreless design, 30 Sq. Ft. each, 9 5/8" (24.4cm) high (part #PDM30)
Picture 1
Picture 2
Picture 3
56
DOC: OM-SRULTIMATE-19
1) Shut off your spa at the Ground Fault Circuit
Interrupter (GFCI) or Residual Current Detector
(RCD).
2) Remove the decorative top cover.
3) Remove the coreless cartridges by threading the
large nut off the permanent core. Then lift the
cartridge up to remove it. (Picture 3)
4) Reverse the procedure to install new or cleaned
cartridges.
Sunrise Spas 2019 Ultimate Collection Owner's Manual