Sunrise spas ultimate collection OM-SRULTIMATE-19 Guide D'utilisation page 17

OTHER INTERNAL FITTINGS
Suctions
These multi-holed, anti-vortex fittings in the footwell provide the intake water for the pump(s). A
powerful suction is produced here when the jet pumps are turned on. On systems with a
circulation pump, the bypass suction fitting (smaller than regular suction), may have little to no
suction on it, since the circulation pump has a lower flow than the jet pump and the suction is
only active as the filter(s) become clogged.
All suctions in our spas are VBG compliant for your safety.
Ozone/AquaNova Returns
These special thru wall fittings return water to your spa that has passed through the ozone or
AquaNova system. If you do not have either ozone or AquaNova on your spa, these fittings will
not be present.
Skimmer/Filter
This is the housing for your cartridge filter(s) and provides skimming action to remove surface debris. Some models
have a removable basket from which debris can be dumped.
DECK CONTROLS
Sunrise Spas 2019 Ultimate Collection Owner's Manual
XL Plus
Air Controls
Located on the deck of the spa, these valves control the amount of air being mixed with
the water stream at each jet. The minimum to maximum movement is approximately ¼
turn or on/off for toggle type. More air will increase the massage effect from the jet.
Proper air draw is achieved when the jet pump is operating on high speed, particularly if
the pump is a 2-speed pump.
On/off Water Valve
This positive seal valve is used to turn the water feature on/off. Adjust it as needed to
achieve the best effect from the water feature.
DOC: OM-SRULTIMATE-19
17