Removal And Installation Of The Click Change Cladding Inserts - Sunrise spas ultimate collection OM-SRULTIMATE-19 Guide D'utilisation

REMOVAL AND INSTALLATION OF THE CLICK
CHANGE CLADDING INSERTS
Whether you are removing a cladding section to replace a damaged one or taking off all of them to replace with a new
look, follow this procedure to avoid damaging inserts.
Removal
1) Use 2 flat head screwdrivers
2) Insert 1 screwdriver above the centerline of the insert to be removed and the other below the centerline of the
insert
3) Slide each screwdriver inward to wedge the insert away from the panel
4) Applying equal force to each screwdriver pull the screwdriver handles outward away from the panel. This will
disengage the first section of the retention clip on the insert from the panel
Note: Applying unequal force will result in cracking or chipping the insert.
5)
Grab the exposed insert edge firmly with your hand and slide the insert out of the panel
6)
Repeat for each of the inserts you wish to remove
26
DOC: OM-SRULTIMATE-19
Sunrise Spas 2019 Ultimate Collection Owner's Manual