dirna Bergstrom Bycool SLIM FIT Instructions De Montage page 20

SLIM FIT
EN
Check that the mounts are properly supported
10
in the front and back and that there is no wiring
which can be crushed. Tighten the M8 nuts
until the mounts come up against the base
hexagons.
10
Hexagon L=22 (M8)
Upholstery
Fastening mount
Position the console on the interior air
11
distribution panel and secure with (4) 6/100x10
Phillips head screws and (4) Ø6 wide-rimmed
flat washers on hexagons.
Hexagon L=18
10
Hexagon L=17 (M8)
Interior air
distribution panel
20
Air conditioning for vehicles
30x25 EPDM Seal
Cabin roof
Hexagon L=24 M6