Cleaning And Maintenance - Reliable BRIO 225CC Guide D'utilisation

WARNING
Always ensure before cleaning or maintaining the steam cleaner that it is switched
off and unplugged from the main power supply.
Only clean the appliance by wiping over the housing with a lightly moistened cloth.
Do not use any cleaning agents, abrasives or alcohol since they may damage the
housing.

CLEANING AND MAINTENANCE

We recommend that the tank be rinsed out after 5 filling operations at the latest if
your water is hard. To rinse your steam cleaner start by adding water to the tank
and giving it a good shake to clean it, this will loosen any lime-scale that has been
deposited on the bottom of the steam cleaner.
The water tank should be treated with lime—scale remover approximately every 6
months to prolong the steam cleaner's life. Place one limescale removal packet in
1 litre of warm water and fill the water tank with it. Allow the solution to work for
approximately 30 minutes and then pour away the water with the dissolved solids.
Repeat this process if necessary and then rinse out the tank with water. Then pour
out the water and allow the tank to dry out completely before closing it.
DISPOSAL AFTER END OF USEFUL LIFE
If the appliance's useful life has come to an end, the appliance should be rendered
unusable by removing the plug from the socket and cutting off the power cable.
Please dispose of the appliance properly through your public waste authority.
15