Reliable BRIO 225CC Guide D'utilisation page 11

The floor nozzle is ideal for cleaning washable wall and hard floor surfaces. It may
be used with or without the cleaning cloth. However, we recommend using the cloth
to protect sensitive surfaces such as wood or linoleum. Place the floor nozzle on the
cleaning cloth and secure the overhanging material under the cleaning cloth clips
on the left and right. Press on the inner sides of the holder, then open the clips and
the cleaning cloth can be secured in place (Fig.9). To take the floor nozzle off again,
press in the appropriate release button (see Fig.7), and pull the nozzle off with a
downward movement.
The Brio 225CC has a range of attachment nozzles to enable the most effective and
thorough cleaning of different surfaces. First assemble the accessory adaptor so
that these attachments can be connected to the steam cleaner hose. The accessory
adaptor can be attached directly to both the steam gun and the end of one or more
extension tubes.
Ensure that the adaptor is firmly pushed on until it clicks into place (Fig.10). Press
in the appropriate release button and pull apart with a downward movement to take
the adapter off again.
Simply push the jet nozzle firmly into the accessory adaptor to attach it (Fig.11). This
nozzle makes it possible to clean hard to reach places such as corners, joints and
toilets with ease. The jet nozzle may be removed by pulling it off with a downward
movement.
09