Using - Unold 87450 Notice D'utilisation

USING

Please note that the results can vary greatly due
to the different hair structures of each person. To
prevent damage to your hair, select a temperature
that is suitable for your hair, ensure that you do
not style coloured or damage hair at excessively
hot temperatures. To avoid damaging your hair,
please do not use any chemical hair styling
products, such as hair spray before straightening
your hair. Naturally you can use suitable heat-
protection products.
Caution:
extremely hot during operation! There is
danger of burn injuries if there is direct
skin contact.
1. Only use the appliance on hair that is com-
pletely dry; use of the appliance on wet hair
can damage hair.
2. Plug the power cord into an electrical outlet.
3. Switch on the appliance via the ON/OFF switch
by keeping the switch depressed for at least
two seconds.
4. Select the desired temperature level by press-
ing the „+" and „-" buttons until the desired
temperature is reached. It is possible to set the
temperature in six increments between 130°C
and 200°C, each selected temperature level is
displayed through illuminated segments.
5. The following temperatures can be set (the
factory setting is level 4):
ƒ Level 1
ƒ Level 2
ƒ Level 3
ƒ Level 4
ƒ Level 5/6 approx. 190-200°C, for thick
Copyright UNOLD AG | www.unold.de
The appliance
approx 130°C for first use or for
extremely soft hair
approx. 145°C, for hair that has
been treated with chemicals
approx. 160°C, for a normal hair
structure or slightly wavy hair
approx. 175°C, for a normal hair
structure or slightly wavy hair
curly hair
becomes
23