Technical Features; Controlling The Volume; Power Saving Function - Sony MFM-HT205 Mode D'emploi

3 Press the M/m buttons to select "All Reset" and
press the OK button.
The "All Reset" menu appears on the screen.
Option
PIP/PAP
TeleText :
Input Sensing :
Language :
Menu Position
Menu Lock :
Demo Mode :
All Reset
Select
4 Press the M/m buttons to select the desired mode
and press the OK button.
• OK:
To reset all of the adjustment data to the default
settings. Note that the "Language" setting is not
reset by this method.
• Cancel: To cancel resetting and return to the menu screen.
Note
If you select OK in step 4, the adjustments made using the "Set Up" menu
are also set to the default. Therefore, after selecting OK, you need to set
up your channels again to watch TV programs (page 15).
DVI-D: PC 1
On
English
Off
Off
OK
Cancel
1680 × 1050/60 Hz
Set Exit
OK MENU

Technical Features

Controlling the volume

Using the display's speakers or headphones, you can listen to
sound from your computer or other equipment connected to the
display's audio input jacks.
You can control the volume by inputting either PC 1/PC 2 or TV/
COMPONENT/VIDEO 1/VIDEO 2.
You can control the volume by using the "Volume" adjustment
bar.
1 Press the w+/– buttons when there is no menu
displayed on the screen.
,
w
2 Press the w+/– buttons to set the desired volume
level.
The bar automatically disappears after about 5 seconds.
Notes
• You cannot adjust the volume using the M/m buttons on the display
when the main menu is displayed on the screen. Use the 2 +/– buttons
on the remote control instead.
• You cannot adjust the volume using the M/m buttons on the remote
control.
• When your display is in power saving mode, no sound comes from the
speakers or the headphones.

Power saving function

If the display is connected to a computer or video graphics board
that is DPMS (Display Power Management Standard) for Analog
input/DMPM (DVI Digital Monitor Power management) for
Digital input compliant, the display will automatically reduce
power consumption as shown below.
Power mode Power consumption
normal 99 W (max.)
operation
active off* 2 W (max.)
(deep sleep)**
* When your computer enters the "active off" mode, the input signal is
cut and "No Input Signal" appears on the screen. After 5 seconds, the
display enters the power saving mode.
** "Deep sleep" is a power saving mode defined by the Environmental
Protection Agency.
Tip
When the display is in the standby mode or the Sleep timer is activated,
the 1 (power) indicator lights up in red.
31
Volume 30
(power)
1
indicator
green
orange
GB