cecotec CONGA 750 Manuel D'instructions page 16

ENGLISH
Quick start guide
1. Turn on the power switch at the bottom of the product. The
steady (if the product is not used within 30 seconds, it will enter hibernation mode).
NOTE
· Make sure that the power switch has been turned on. Otherwise, the product will be unable to be
operated and charged.
· If the button turns red and flashes and the robot produces an alarm sound while being charged,
it indicates that the power switch has not been turned on and the product cannot be charged.
· Please make sure that the power switch is on before charging. Otherwise, the product will not
charge.
2. Charge the product as shown below:
In order to lengthen the battery's lifespan:
If the product is not to be used for a long time, please charge the product completely, turn off the
power switch and remove the battery to store it in a fresh and cool place.
16 CONGA 750
A protection barrier should be placed infront of stairs to make sure
that the product works safely.
button should turn green and stay