Trouble Shooting - Grandin LSV16A5 Manuel D'utilisation

ENGLISH

TROUBLE SHOOTING

Do not use other functions that are not mentioned in this instruction manual.
In case a problem occurs with your LCD TV, please take the following steps
If you still have the problem, turn the power
authorized service center.
Symptoms Possible cause What should you do
No power or TV is not 1. Switch on the main power switch to power on
indicator light connected to
the power
2. Ensure the power cord is connected tightly to
3. Power
4. Connect the TV to a
Error message HDCP 1. Ensure that your HDMI cable Is
on the screen authentication
2. Press INPUT button to switch to another
with HDMI fail.
connection.
3. Reset the accessory device and the TV.
4. While the TV and the accessory device are
No sound is Audio cable is 1. Connect an audio cable to the VGA AUDIO
detected from not connected.
the PC.
2. Press INPUT button .and select the VGA
TV does not Batteries 1. Ensure that you are using the remote control
respond to are installed
the remote incorrectly or
2. Ensure that the batteries of the remote control
control. low battery
power.
3. Power
GB-35
and contact your dealer or an
the TV. Press POWER button to turn on the
TV from standby.
the TV AC IN socket and to the power socket
outlet.
the TV and remove the power cord
from the power socket outlet, wait 60 seconds
and reconnect the power cord.
power socket
outlet.
source and then switch back to the HDMI
source.
• Turn on the TV
• Select the HDMI input source
• Turn on the accessary device
powered on, unplug either end of the HDMI
cable and then reinsert the cable.
IN port on the TV.
input source.
supplied with the TV.
are inserted according to the +/- markings
indicated inside the remote compartment and
that the batteries do not need to be replaced.
the TV and remove the power cord
from the power socket outlet, wait 60 seconds
and reconnect the power cord.
Symptoms Possible cause What should you do
picture Insecure / 1. Ensure all the connections are made according
is mostly red incorrect to the color code.
and green, or connection.
2. Push the component cables all the way into
the picture
the YPbPr sockets on the TV.
is missing
red when
the TV is
connected to
an accessory
device via
component
cables.
NO sound Volume level 1. Increase the volume.
on the TV is set to zero.
loudspeaker.
Sound is 2. Press MUTE on the remote control.
muted.
Audio cable is 3. For AV connection, ensure that the Audio
not connected L/R cables are connected, If you are using a
component cable, ensure that you have not
crossed the red audio cable with the red video
cable.
Accessory 4. For HDMI connections, some accessory
device audio devices have an HDMI audio output setting
output setting that must be turned on for HDMI to HDMI
is incorrect. connections.
Bad picture Standard 1. Connect the devices via component or HDMI
quality via cables.
a coaxial channels
connection. are not as
clear as high
channels.
No picture or Incorrect 1. Ensure you have selected the correct channel.
sound channel.
2. If the TV receives channels via an AV
Incomplete connection, set the TV to the correct source
channel input.
installation.
3. If the TV is connected directly to the wall via
a RF coaxial connection, perform the Auto
Scan again.
ENGLISH
GB-36