Grandin LSV16A5 Manuel D'utilisation page 30

ENGLISH
Note:
1. Auto Installation is displayed for the TV
mode only when the TV is turned on for
time.
2. If you would like to scan for stations again,
select» Auto Search» in the Channel menu.
Switch the TV on / standby
Please make sure the power cord is connected.
• Press the POWER ( ) button on the remote control or on the side of the TV
to switch the TV on.
power indicator changes from red to green.
• Press the POWER ( ) button again to switch the TV to standby mode.
power indicator will change from green to red and the appliance will
Selection of Input Mode
• Press the INPUT button to display the Input source menu.
• Press / button to select the signal source you desire, then press the OK
button to c
OSD Option Adjustment
After you have installed the batteries into the remote control, you may want to set
some preferences on the LED using the menu system.
• buttons for OSD option adjustment include:
Menu , , , , OK and Exit buttons.
• Press the Menu button to display the OSD Setup Menu then press
to select the pages.
pages are displayed in the following sequence (circular display):
PICTURE SOUND CHANNEL
Note: CHANNEL menu page is displayed only for TV mode.
1. Press the Menu button to display the OSD setup menu.
2. Press the / button to select the menu pages.
3. Press the or OK button to enter.
4. Press the or button to select an item.
5. Press the / / / button to select or adjust a setting.
6. If you do not make a selection within several seconds, the main menu closes
automatically.
7. Press the Menu or Exit button to return or exit OSD setup menu.
GB-13
/ button
FEATURE SETUP
OSD FUNCTION
PICTURE PAGE MENU
Adjust scale of BRIGHTNESS,
CONTRAST, SHARPNESS,
COLOUR, TINT, COLOUR
TEMPERATURE, ASPECT
RATIO, NOISE REDUCTION,
in the PICTURE MENU.
PICTURE MODE
Adjust the Picture mode.
Press the MENU button and press the to select Picture MENU.
Press the button to select Picture mode.
Press the / to set one of the following picture modes:
Dynamic Standard Mild
Press the MENU or EXIT button to return or exit.
*Brightness, Contrast, Sharpness, Colour and Tint may only be adjusted when the
"picture mode" is set to "USER"
BRIGHTNESS
Adjust the brightness of the picture.
Press the MENU button and press the to select PICTURE MENU.
Press the button to select BRIGHTNESS.
Press the / button to adjust the BRIGHTNESS.
Press the MENU or EXIT button to return or exit.
CONTRAST
Adjust the level of white in the picture.
Press the MENU button and press the to select PICTURE MENU.
Press the button to select CONTRAST.
Press the / button to adjust the CONTRAST. Press the MENU or EXIT
button to return or exit.
ENGLISH
User
GB-14