Formatting The Memory Card; Digital Zoom; Mirror Function / Image Rotation; Setting Video Output Format - VOLTCRAFT BS-1000T Mode D'emploi

h) Formatting the memory card
To delete all data on the inserted SD card, proceed as follows:
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose "Delete All" and press "OK".
3. Use the / buttons to select "YES" and confirm deletion of the file; otherwise, select "NO" to cancel deletion.
i) Digital zoom
The recorded image can be enlarged in ten stages (max. 2.0 times). Proceed as follows:
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose "DIGITAL ZOOM" and
press "OK".
3. The endoscope switches back to preview mode with the function "Digital Zoom" activated. Press the
buttons to zoom in or out.
4. To switch off digital zoom again, call the menu, select "DIGITAL ZOOM" and press "OK" again.
j) Mirror function / image rotation
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose "MIRROR" and press "OK".
3. Use the / buttons to choose the desired effects.
DEACTIVATE
HORIZONTAL
VERTICAL
FOLD
k) Setting video output format
To play back the recorded images/videos, first set the correct playback format. Proceed as follows:
1. Press the "OK" button once to call the menu.
2. Use the / buttons to move the cursor upwards or downwards and then choose the menu item "Video
Format" and press "OK".
3. Select the correct video format with the
For correct connection of the AV cable, please also observe the notes in chapter "Outputting video signals
to a TV".
PAL is the European TV standard. If you are using a TV that uses the North American TV standard NTSC,
use this selection instead.
30
No effect.
The image is mirrored horizontally.
The image is mirrored vertically.
The figure is rotated by 180°.
/ buttons and press "OK" to confirm.
/