•
As the temperature controller is a highly sensitive component, make sure it is
protected against falling, hitting or strong shocks.
•
Before connecting of disconnecting the temperature controller, make sure that
the dial is set to „OFF" position. Failure to observe this instruction may lead to
interruption in the device operation or overheating.
•
Make sure the temperature controller is plugged in tightly. When disconnecting the
temperature controller do not pull the cord but only the plug. When connecting or
disconnecting the temperature controller do not use excessive force.
•
Always keep dry and clean the temperature controller and poles of the socket.
•
Do not place the temperature controller on the heating place. Always make sure that
it does not get into contact with the heating plate.
Switching the device on
CUATION!
Before connecting the temperature controller, set the dial to „OFF" position.
First, connect the temperature controller to the device and then to the mains
socket.
•
Connect the device to a single, properly installed and grounded socket.
•
Set the temperature dial in the position corresponding to the temperature desired for
a given dish.
NOTICE!
During the operation, the control light is coming on and off, which
indicates that the set temperature is being maintained.
•
You can begin cooking only when the device has reached the set temperature (the
control light goes off).
•
Prepare the food products.
•
Time of cooking depends on the type of dish, its size and quantity, individual taste and
the extent to which it has been pre-cooked and it should be determined based on
personal experience.
•
Using the temperature dial you may adjust the temperature
within the range from 90 ° C to 210 ° C.
•
„OFF" position of the temperature controller is used for
switching the device off.
•
When the temperature dial is set to some specific
temperature, the control light in the temperature regulator
will come on, indicating that the multi pan is heated.
- 29 -