Publicité
Les langues disponibles
Les langues disponibles
2.6 USB-Port
• For readout or programming, the data logger must be connected via USBcable with
a PC.
• View from the front: On the left side there is the USB-port. The port is protected by a
small white rubber cap. To operate the USB-port please remove the rubber cap.
• After the completed communication with the PC do not forget to plug the rubber cap
back into the port. It prevents dirt and water from entering the data logger.
2.7 Rear side of the data logger / battery case
• On the rear side of the data logger you will find the battery case and a printed sticker.
2.8 Replacing battery
• To replace the battery please open the battery cover on the rear side. Therefore
you have to turn the battery cover 90° to the left. Remove the battery from the
instrument and replace with a new battery.
• The "BAT "symbol indicates that the battery needs to be exchanged. The instrument
allows app. 10 hours of further operation after displaying the "BAT" symbol The
battery symbol indicates according to the battery status between 1 to 3 segments.
• If the display indicates only "PF", the battery is completely exhausted.
Please replace the battery immediately.
2.9 Waste disposal
This product has been manufactured using high-grade materials and components
which can be recycled and reused.
16
Never dispose of empty batteries and rechargeable batteries in household
waste.
As a consumer, you are legally required to take them to your retail store or
to appropriate collection sites depending on national or local regulations in
order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical
and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user
is obligated to take end-of-life devices to a designated collection point
for the disposal of electrical and electronic equipment, in order to ensure
environmentally-compatible disposal.
3.0 Specifications
Temperature logger Temperature-humidity
Internal temperature
Relative Humidity
Memory
Interface
Working temperature (without display)
Storage temperature
Dimensions
Weight
Power supply
Log10
Log20
-30..+60°C
-30..+60°C
- - -
0..100%rF
appr. 20.000 Data sets
USB
-30..+60°C
-30..+70°C
92 x 55 x 21 mm
95 g
1 x CR2032 3 V
17
Publicité
