Wisi OV 96A QPSK/MPEG2 Notice D'utilisation page 7

3.2 Inserting the CAM
correctly
Insert CAM bevore
OV 96A is built in.
4. Operation
Notes
Saving changes,
power failure
Forward Error Correction FEC:
In order to ensure insertion in the correct orientation, most
CAMs have an arrow printed on them and have two bars on the
left and one bar on the right. Nevertheless, it is still possible to
insert the CAM incorrectly.
Correct insertion
It should be possible to press the CAM into position with one
finger.
Do not use excessive force! After insertion, the CAM should be
flush with the Common Interface slot.
CAM
2 bars
CI slot
Use the UP/DOWN keys
change digits in a selected menu line.
Use the L/R keys
a menu line, and also to select the digit to be changed.
The data are saved automatically every 25 seconds and can
be saved manually with the
All data are retained in the case of a power failure.
is set automatically.
1 bar
( ) ( )
( ) ( )
to open a menu line and to exit from
( )
(GB)
Correct
CAM
Incorrect
CAM
to select menu items and to
key.
CI
slot
CI
slot
- 7 -