Publicité
Guarantee / Declaration of conformity:
EN
The Manufacturer default warranty period is 12 months after date of delivery. Proof is the invoice.
Condition is that the machine has been used, maintained and cleaned correctly and that no repairs by others have been made.
The guarantee is limited to repairs free of charge or replacements of the damaged parts that are caused by material defects or production faults.
Parts that have been damaged by normal wear or repairs made by oneself or others are not subject to this guarantee.
This guarantee is only valid if the correct tools, original accessories and spare parts have been used.
All other claims are excluded, i.e. RUKO is not liable for direct or indirect defects, damages caused by defects, losses or costs that may arise
from the use or the impossibility to use the machine for a certain purpose.
Tacit assurances concerning the use or aptability for a certain purpose are not possible. If a defect is noted the machine has to be sent to
RUKO GmbH as quickly as possible for repair. All earlier verbal or written guarantee declarations are replaced by the above mentioned guarantee.
Declaration of conformity:
We declare in sole responsibility that the product sold by us is in accordance with the following technical norms or normative documents:
EN 55014 - 1: 2006 + A1:2009 + A2: 2011
EN 55014 - 2: 1997 + A1:2001 + A2: 2008
EN 61000 - 3 - 2: 2006 + A1: 2009 + A2: 2009
EN 61000 - 3 - 3: 2008
according to the regulations stipulated in the directives 2004/108/EG EMV
2006/42/EG (Machine Directive)
The description of operation is described in the operation instructions.
Ali Dagic
Management
RUKO GmbH PRÄZISIONSWERKZEUGE, Robert-Bosch-Straße 7-11, D-71088 Holzgerlingen, Germany
11
EN I english
Publicité
