Operating instructions
EN
Symbol
Term, meaning
Read documentation
Wear ear protection
Wear eye protection
Danger/warning/caution
European conformity symbol
Class of protection I
Turning machine on and off
The control panel on your magnetic drilling machine is designed
for maximum operating facility and safety.
1 - The ON Switch (GREEN):
This (upper) switch is used to switch the motor unit On ("I");
2 - The OFF Switch (RED)
This (lower) switch is used to switch the motor unit Off ("O");
3 - The Magnet Switch (RED):
This switch is used to turn on the main power and also
to switch the magnet On and Off.
Activating the magnet
Connect the machine to the work piece. To activate the magnet, press de RED switch.
Turning the motor on and off
The drill motor can only be switched on when the magnet is activated. To turn ON the motor, press the GREEN button "-",
o turn OFF the motor, press the RED button "0".
10
Explanation
Be absolutely sure to read and understand the enclosed documentation
such as Instruction Manual and the General Safety Instructions.
Use ear protection during operation.
Use eye-protection(safety goggle) during operation.
Observe the information in the adjacent text!
Confirms the conformity of the power tool with the directives
of the European Community.
Product with basic insulation and exposed (touchable),
conductive parts additionally connected to the protective earth conductor.
3. Magnet switch
1. ON switch
2. OFF switch
EN I english