Publicité
Les langues disponibles
Les langues disponibles
Return
1. «Start / pause» button
Return
A. In standby mode, press this button to have your device start automatically
Start
its cleaning cycle.
B. When the device is asleep, press this button to return it to standby.
Pause
C. In operation, press this button so that the appliance stops its cleaning cycle.
Return
2. Direction buttons
Start
A. Forward ▲
In standby or operation, press this button so that the device advances.
Pause
B. Backward ▼
In standby or operation, press this button to make the device reverse.
Start
Powerful
C. Left ◄
Pause
In standby or operation, press this button to make the device turn to the left.
D. Right ►
In standby or operation, press this button to make the device turn to the right.
Auto
Edge
Powerful
Edge
Powerful
Auto
Auto
3. Auto button
Press this button to start the
automatic cleaning cycle.
NOTE :
- 2 AAA (LR03) 1.5V batteries are required
1. Place the charging base against the wall
2 meters of space in front. Then connect the power cable and make sure that the LED
indicator is on.
2. Switch on the device by pressing the
into standby mode.
Warning : Before recharging the device, make sure that the switch is set to «I». If the switch is
on «O», the robot will not be able to recharge.
3. Place the water tank on the robot.
Fill the tank with cleaning solution diluted in water. Hang the microfiber
on the velcros on the water tank and clip the tank under the robot.
Warning : Do not fill the water tank if you are not using the robot right
away, because the tank will empty on site.
4. Charging your device can be done in 2 ways.
A. Insert the adapter directly into the device and plug the other end of the power supply into the power outlet, as shown in
Figure A below.
B. Press the «Return» button on the remote control or directly on the robot button, so that it automatically returns to its charging
base, as illustrated in Figure B below.
Note : When using the charging base, press the «Start / Pause» button on the remote control or directly on the robot button so
that it stops charging and starts cleaning. Note that this operation cannot be performed when you connect the adapter directly
to the robot.
Remote control
Return
Start
Pause
Edge
Powerful
4. Powerful button
Auto
Press this button to star t
cleaning the desired area.
The suction power is more
intense than in automatic mode.
Starting the product
1 meter away from any obstacle. Leave
switch.
Edge
5. Edge button
Press this button to star t
cleaning along the baseboards.
- If the remote control is not used for an extended period of
time, remove the batteries.
The robot emits a sound and goes
Return
Start
Pause
Powerful
Return
6. Return button
Auto
Press this button to ask the robot
to return to its charging base.
Pause
Edge
Start
Powerful
Auto
Publicité
