Publicité
Les langues disponibles
Les langues disponibles
Note :
- The first time, charge the device for 12 hours.
- Regularly check that the power cable of the charging base is correctly connected. With the robot coming and going, the cable
may end up unplugging slightly.
- If the robot is not used for a long time, set the switch to «O».
4. Automatic recharging.
A.When the battery level of the device is too low, the robot automatically returns to its charging base.
B. Ensure that the charging base is energized and remove the surrounding obstacles so that the robot does not get lost while
looking for it.
C. In order to find its most suitable position, the robot can test the charging base 3-4 times before setting up for charging.
D. This product complies with the European standard of energy consumption ERP .
5. The different modes of your robot.
A. Active mode
All lights and buttons are on and the device is in operation.
Make sure that the switch is in the «I» position. Start the robot
by pressing the «start / pause» button on the remote control
or directly on the robot button.
B. Standby mode
The charging base LED is on, the robot button is on, the device
is only in standby.
Press the «start / pause» button on the remote control once or
directly on the robot button to start it.
6. The 3 cleaning modes.
Automatic
«Auto» button
Cleaning adapts to
your room and your types
of floors automatically.
Note :
A. Once the deep cleaning or along the baseboards is finished, the robot will return to automatic mode to finish its work.
B. Whichever mode it is in, the robot will stop cleaning if you press the «start / pause» button on the remote control or directly
on the device button.
C. Sleep mode
If the robot is not used for more than 25 seconds, it will
automatically go into sleep mode.
Note :
To switch from sleep mode to standby mode, press the «start /
pause» button on the remote control or directly on the device
button. Press a second time to start cleaning.
Deep cleaning
«Powerful» button
Place the robot on the area
to clean up and it will accentuate
his aspiration for this place.
Along the baseboards
«Edge» button
The robot will perform its cleaning
cycle starting along the baseboards.
Publicité
