Getting To Know The Technical Data; Mounting The Stirrer Axle And Stirrer - Meister MRW1400-2B Traduction Du Manuel D'utilisation Original

SN: XXXXX
Conmetall
Meister...

Getting to know the technical data

Physical data
Dimensions
(W x H x D) without stirrer axle and
stirrer: 300 x 300 x 160 mm
With stirrer axle and stirrer:
300 x 885 x 160 mm
Length of
mains cable 3.00 m
Tool holder M 14
Weight Without stirrer axle and
spiral stirrer: approximately 3.5 kg
With stirrer axle and spiral
stirrer: approximately 4.6 kg
Mixing substance
volume maximum 120 litres
Spiral stirrer
type WK 140
Electrical data
Operating
voltage
Mains frequency 50/60 Hz
Power
consumption
Protection class II
Idle speed
Ergonomic data
Sound pressure level
Measuring inaccuracy
50
5451940-Ruehrwerk-man.indd 50 5451940-Ruehrwerk-man.indd 50
The first two underlined
numbers give the month
of manufacture.
Manufacturer address
220-240 V~
1,400 W
speed range 1:
n : 0–480 min -1
0
Speed range 2:
-1
n : 0–800 min
0
L = 86 dB(A)
pA
L = 97 dB(A)
WA
K = 3 dB
pA
K = 3 dB
WA
Vibrations a = 5.71 m/s
h
Measuring inaccuracy
K = 1.5 m/s
a "mixture of hard water"
h
The measured vibration
values were determined in
accordance with EN 62841.
The specified vibration emission value
was measured in accordance with a
normed test procedure and can be used
in order to compare one electrical tool
with another.
The specified vibration emission value
can also be used for an introductory
evaluation of the influence.
The vibration emission value may fluctuate
from the specified value during use of the
power tool. These fluctuations will depend
on the way in which the tool is used.
Safety measures must be taken to protect
the operator. As a result, the evaluation of
the influence must be made whilst taking
the actual conditions of use into account.
(All parts of the operating cycle must be
taken into account for this purpose. This
also includes the time in which the tool is
switched off and when it is switched on,
but running without load.)
5 – Using the stirrer

Mounting the stirrer axle and stirrer

Driven moving parts.
Risk of injury if switched on
unintentionally.
Disconnect the device from
the power supply.
2
2
22.01.21 08:26 22.01.21 08:26