Table des Matières
Publicité
11/04/26 16:12:41 32Z30600_031
AC Applications
Substantial overloading will switch off the AC circuit breaker.
Marginal overloading may not switch off the AC circuit breaker, but
it will shorten the service life of the generator.
Be sure that all appliances are in good working order before
connecting them to the generator. Electrical equipment (including
lines and plug connections) should not be defective. If an appliance
begins to operate abnormally, becomes sluggish, or stops suddenly,
turn off the generator engine switch immediately. Then disconnect
the appliance, and examine it for signs of malfunction.
1.
BT type only
Set the Voltage Selector Switch to
match the voltage requirements
for the application.
2.
Start the engine (see page
3.
Switch the AC circuit breaker ON.
4.
Confirm that the appliance to be
used is switched off, and plug
in the appliance.
Most motorized appliances require more than their rated power for
startup.
VOLTAGE SELECTOR SWITCH
22
).
AC CIRCUIT BREAKER
ON
PLUG
115 V
230 V
ON
29
Publicité
Table des Matières
