Blatchford EliteVT Instructions D'utilisation page 9

8 Foot Spring Replacement
7
Insert assembly into foot shell, push toe spring as
far forward as possible while sliding carrier and
heel assembly forward in the foot shell.
9
Toe Spring location
in Foot Shell
Push toe spring towards carrier. Ensure glide sock
doesn't get trapped between the spring and
carrier. Push spring into location in shell.
11
Attach the toe spring to the carrier using Loctite
243 (926012) on the bolts.
1. For spring rates 1 to 7 use 4 A/F Allen
wrench and torque to 15 Nm. Do not use
external hex, this is reserved for loosening
the bolt, if required.
2. For spring rates 8 and 9 use 13 A/F
spanner and torque to 25 Nm.
(continued)
8
B elow
heel
30 mm
Slide a metal shoe horn between heel spring and
back of foot shell opening and lever the spring
down into the foot shell.
10
Press heel spring into location in shell as shown.
12
Bond foam cosmesis to top surface of the foot
shell as shown using Thixofix adhesive (926204)
or equivalent and shape to suit.
9
30mm
Heel
Spring
location
slot
938289/8-1219