Installing The Pen Batteries - Epson BrightLink 450Wi Guide Rapide

Installing the Pen Batteries

Make sure the pen batteries are installed. To check the batteries, press the button.
If the indicator light is green, the batteries have enough power.
Battery indicator
light
It's a good idea to attach a commercially-available cord or lanyard to the pens.
If you need to install or replace the batteries, use two alkaline AAA batteries. If you
have a battery charger, you can also use rechargeable AAA batteries.
1. Press in the tab on the battery cover as you lift the cover off.
2. Install two batteries, inserting the
3. Replace the battery cover and press it down until it clicks into place.
Button
+
and ends as shown.
–
Installing the Pen Batteries
Cord
attachment
slot
7