Epson BrightLink 450Wi Guide Rapide page 28

■
If you see a
1. Open
2. Click
3. Click
4. Do one of the following:
Mac OS X 10.6x: Click
Other versions of Mac OS X: Make sure the
dialog box is selected, click the
sure the
Interactive Pen Problems
■
Make sure the USB cable is securely connected to the projector and computer.
Try disconnecting and reconnecting the cable to your computer.
■
If you don't see the
(Mac OS), do one of the following:
Windows: Select
Projector
Macintosh: Open the Application folder, then select the
icon.
Driver
■
If you see a red
connected correctly. Try removing and reconnecting the USB cable.
■
Make sure the pen batteries have enough power. If the light on the pen doesn't
turn green when you press the button, you need to replace the batteries.
■
Make sure you are not casting a shadow on the projection surface, and
nothing is blocking the signal between the pen and the interactive receiver on
the projector. The cable cover should be attached to the projector to keep the
cables out of the way.
■
Dim the room lights and turn off any fluorescent lights. Make sure the
projection surface and the pen receiver are not in direct sunlight or other
sources of bright lighting.
■
For easier operation, hold the pen at an angle to the projection surface.
28
Solving Problems
message and you're using a Macintosh:
No Signal
System Preferences
or
Display Displays
.
Detect Displays
Mirror Displays
pen icon on your taskbar (Windows) or in the Dock
or
Start
>
Easy Interactive Driver
on the pen icon, the computer and projector are not
X
.
.
Show displays in menu bar
Arrangement
checkbox is selected.
>
All Programs
.
.
or
VGA Display
or tab, then make
Arrange
or >
Programs EPSON
Easy Interactive
Color LCD