Introduction
After your projector has been mounted on the wall, read this booklet to:
■
Install the software on your computer
■
Connect the cables to your computer
■
Use the remote control
■
Turn on the projector and adjust the image
■
Calibrate and use the pens
■
Use Easy Interactive Tools
■
Solve basic problems
This booklet explains how to use the projector with a laptop or other computer.
You can also connect the projector to video players, document cameras, or other
equipment. For additional information, see the on-screen User's Guide. For
network information, see the on-screen EasyMP
™
BrightLink
450Wi CD.
Before using the projector, make sure you read the safety instructions in the on-
screen User's Guide on the projector CD.
Please follow these guidelines as you read your projector instructions:
Warning:
Warnings must be followed carefully to avoid bodily injury.
Caution:
Cautions must be observed to avoid damage to your equipment.
Note:
Notes contain important information about your projector.
®
guides included on the
3