Philips AVENT SCD560 Mode D'emploi page 11

Masquer les pouces Voir aussi pour AVENT SCD560:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
Setting feed timer repeat
1
To make the feed timer go off after the same set time, select 'Repeat' in the feed timer
submenu after you have set the timer. Press OK to confirm.
2
Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm.
3
If 'Repeat ON' is set, the feed timer starts counting down again after you stop the alert.
temperature
A baby sleeps comfortably at a temperature between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range. You can also set a temperature alert.
1
To open the temperature submenu, select 'Temperature' in the menu. Press OK to confirm.
2
Select 'Temp Range' in the temperature submenu and press OK to confirm.
3
Use the + and - buttons to set the minimum temperature range between 10°C/50°F and
19°C/66°F and the maximum temperature range between 22°C/72°F and 37°C/99°F. Press
OK to confirm.
4
Select 'Alert' in the temperature submenu. Press OK to confirm.
5
Select 'Alert ON' or 'Alert OFF'. Press OK to confirm.
6
Select 'Temp Scale' in the temperature submenu. Press OK to confirm.
7
Select 'Celsius' or 'Fahrenheit' and press OK to confirm.
The temperature in the set scale appears on the display.
,
If the temperature is outside the set range, the temperature alert symbol on the display
,
flashes and the message 'TOO HOT' or 'TOO COLD' appears on the display. If you set the
alert to on, the parent unit also beeps (Fig. 15).
Clock
The default setting for the clock is hidden. You can choose to show the clock and set the clock time
in the menu of the parent unit.
1
Select 'Clock' in the menu with the + and - buttons. Press OK to confirm.
2
Select 'Show Time' and press OK to confirm.
3
Select 'Set Time' and press OK to confirm.
4
Set the hour and the minutes and press OK to confirm.
The clock time alternates with other indications in the message field of the display.
,
language
You can use this menu option to change the language setting.
1
Select 'Language' in the menu with the + and - buttons. Press OK to confirm.
2
Use the + and - buttons to select your language and press OK to confirm.
guarantee and support
If you need information or support, please visit the Philips website at www.philips.com/support
or read the separate worldwide guarantee leaflet.
EngliSh
11

Publicité

Table des Matières
loading

Table des Matières