Vacuum Mode - Amibot PRIME 2 Mode D'emploi

EN
Operating the appliance
• The robot must be switched on while it is being charged.
• The robot is charging when the red AUTO light flashes slowly. Once charged, the
AUTO light turns steady blue.
• If the battery is weak while the robot is cleaning, it returns to its home base. The
home base must therefore be switched on.
• Never place the robot on the home base when the H2O tank is inserted.
• If the robot is not used for a long period of time, you are recommended to fully
charge the battery, switch off the robot and store it in a cool, dry place.

Vacuum Mode

Figure 1
To use the vacuum mode, check that the dust bin is inserted inside
the appliance (Figure 1).
12