Declaration Of Performance; Declaration Of Conformity - Hornbach 10252580 Manuel D'installation Et D'utilisation

Declaration of performance

DOP 102525801-CPR, Version: 2020-03-09
1. Unique identification code of product-type:
- Semi-cassette awning 3×2,5m with motor and
emergency manual control (10252580)
- Semi-cassette awning 3,6×2,5m with motor and
emergency manual control (10252581)
- Semi-cassette awning 4×3m with motor and
emergency manual control (10252582)
- Semi-cassette awning 4,2×3m with motor and
emergency manual control (10252583)
- Semi-cassette awning 4,5×3m with motor and
emergency manual control (10252584)
- Semi-cassette awning 4,8×3m with motor and
emergency manual control (10252585)
- Semi-cassette awning 5×3m with motor and
emergency manual control (10252586)
2. Type, batch or serial number or other label for the
identification of the product referred to in Article 11/
Paragraph 4:
10252580, 10252581, 10252582, 10252583,
10252584, 10252585, 10252586
3. The manufacturer's intended use or intended uses of
the product in accordance with the applicable
harmonized technical specification:
Usage at the exterior of buildings and other
structures
4. Name, registered trade name or registered trade
mark and contact address of the manufacturer in
accordance with the Article 11/ Paragraph 5:
Mol sp. z o.o
ul.Szkółkarska 17
62-002 Suchy Las/ Poland
http://www.mol.net.pl/
5. Where appropriate, the name and contact address of
the authorized representative , responsible for the
tasks referred to in Article 12/ Paragraph 2:
Not relevant
6. System or systems for the assessment and verification
of the reliability of the performance of the product
according to Annex V of the Construction Products
Directive:
System 4
7. Not relevant (no notified body involved in system 4).
8. Not relevant.
9. Declared performance
Main Ref.
features
10252580
10252581
10252582
Resistance
10252583
to wind load
10252584
10252585
10252586
Total energy
dissipation
g
tot
10. The performance of the above product corresponds to
the declared performance/s as defined in No. 9. The
above manufacturer is solely responsible for the
preparation of the service declaration in accordance
with Regulation (EU) No. 305/2011.
Signed by the manufacturer :
Jacek Kupczyk
Director of awning department
Person authorized to compile the technical file
Suchy Las, 09.03.2020
Mol sp. z o.o
ul.Szkółkarska 17
62-002 Suchy Las/ Poland
http://www.mol.net.pl/

Declaration of conformity

Hereby, Mol sp. z o.o. declares that the radio equipment
type "remote control" is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
www.hornbach.com/productcompliance
Performance Harmonized
technical
specification
Class 2
EN 13561
Class 1
NPD
ENGLISH | 51