The markings on the arms support
indicate the position of 5 , 15 and
25 degrees. The awning is delivered
with a pitch angle of 15 degrees
which is the recommended value of
the pitch angle.
-Repeat the same procedure with
the second arm.
- Make sure that the front bar is
leveled.
-Tighten the main screw using an
Allen key size 10 from both sides.
Note: For safety reasons , only
individuals adjusting the product
should be allowed under the
awning.
III.2. Cassette's pitch angle adjustment (OPTIONAL)
This step is required after every
adjustment of the arm's pitch angle
(in attempt to minimize the gap
between the front bar and the
cassette, ensuring a good fit
between them
position).
To adjust the pitch angle, follow
these steps (it's preferable that two
people perform this task ):
- Close the awning.
- Loosen the regulation screws
(from both sides) until the cassette
is free to rotate.
Pitch angle indicators
Regulation screw
in the closed
5 degrees
15 degrees
25 degrees
Sector gear
ENGLISH | 45