Hornbach 10252580 Manuel D'installation Et D'utilisation page 42

Install the brackets on the wall
while respecting the
dimensions stated in the table.
The same dimensions should be
respected in
brackets were
brackets should be installed on a
flat surface
horizontal line. Failing to satisfy
this condition will result in fast
degradation
operation of the awning.
II.3. Mounting the awning on the brackets
Mount the awning on the brackets by
sliding the square tube through the
brackets, and secure it with the screws,
washers and nuts .
Finally, install the cover on the screws .
II.4. Electrical installation
The cable should be connected to the
electricity source using the appropriate
method.
This operation should be conducted by
a certified technician.
42 | ENGLISH
W[cm]
case ceiling
used. The
following a
or improper
No. Of
brackets
300 2
360 2
400 3
420 3
450 3
480 3
500 4
Pattern of brackets
on sketch
BLUE=NEUTRAL
It's an antenna, please
BLACK=LIVE
cut off but do not wire!
BROWN=ANT
GREEN/YELLOW=EARTH
A [cm]
[2..10]