Hornbach 10252580 Manuel D'installation Et D'utilisation page 41

II.2.Positioning of brackets
The graph shows the
relation between
the projection,
the installation height (X)
and the pitch angle of the
awning.
The awning is delivered with
a 15° pitch angle (which is
the recommended pitch
angle).
After choosing
installation height (X), the
pitch angle, and taking into
account the projection of
the awning, draw a line on
the graph and make sure
that the point representing
the front bar of this line
doesn't go below the
recommended height line
(200cm).
• Position
of outermost
brackets should stay in the
range of A=[2..10] cm away
from the arm support.
They should be positioned
between the tube support
and the arm support.
In case this configuration
was impossible to achieve,
the brackets could
installed on the other side
of the arm support, while
respecting the same range
A=[2..10] centimeters.
Projection
Recommended height of the front bar
the
Standard position
be
Arm support
Tube support
Alternative
position
ENGLISH | 41