Hornbach 10252580 Manuel D'installation Et D'utilisation page 46

- Rotate the cassette by one tooth, at
a time, of the sector gear.
- Tighten the regulation screws on
both sides.
Note: In case the fit between the
front bar and the cassette is not
appeasing, repeat the arm's pitch
regulation procedure again to obtain
a minimal gap "g" between the
cassette and the front bar.
An Ideal gap "g" should stay in the
range of [1..5] mm.
III.3. Manually opening the awning
Install the hand crank in the eyelet
allocated for, on the right side of the
awning.
Please keep the hand crank vertical
while operation to protect the eyelet
from damage.
The rotation of the hand crank in the
two directions allows the opening or the
closing of the awning
Note: that the use of the hand crank is
intended for emergencies (e.g. blackout,
breakdown of the product, ...) .
46 | ENGLISH