Connections To A Tv Or Vcr - JVC GR-DA30U Manuel D'utilisation

18
Recording & Playback
EN

Connections To A TV Or VCR

1
TV
1 Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
2 Red to AUDIO R IN
3 White to AUDIO L IN
To AV
connector
or
Audio/Video cable
(provided)
2 3
VCR
1
Make sure all units are turned off.
2 2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step
If not, go to step
3 3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4 4
Turn on the camcorder, the VCR and the
TV.
5 5
Set the VCR to its AUX input mode, and
set the TV to its VIDEO mode.
6 6
Start playback on the camcorder (
• Please set "16:9 OUTPUT" of Playback
Menus so that the image may suit your TV
(16:9 TV or 4:3 TV) (
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set "DATE/TIME" to "ON" or "OFF" (
• Time Code
Set "TIME CODE" to "ON" or "OFF" (
• On Screen
Set "ON SCREEN" to "OFF", "LCD" or
"LCD/TV" ( 21).
Notes:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( 11)
• To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder's Power Switch to "REC", then set
your TV to the appropriate input mode.
• Make sure you adjust the TV sound volume to
its minimum level to avoid a sudden burst of
sound when the camcorder is turned on.
• Conversion lens and AV Cable may not be
used at the same time depending on the type
of conversion lens you are using.
• It is recommended to use JVC conversion lens.
Some conversion lens may not be compatible
with this camcorder.
3 3
.
4 4
.
16).
21, 23).
21).
21).