CONTINENTAL EDISON CEMO25FAR Guide D'utilisation page 35

10. Stage Cooking Programming
This allows the user to cook food items at combination of various Power Levels.
1) Three stages can be set at most under programming mode or memory mode.
After setting the power and time for the first stage, press "
And the same step to set the third stage.
2) When setting the second or the third stage, press "
3) Press " " button to start cooking.
Départ
Example: To set "3" as memory mode. The first stageis PL7 and time is 1 minute
25 seconds. The second stage is PL5 and 5 minutes and 40 seconds. The steps are follow.
a. Waiting state, press "
b. Turn the " " to "3" to save the program in "3".
c. Turn the " " to input the cooking time. "1:25" displays.
d. Press " ", "PL7" displays.
The first stage is finished.
e.
Press " ", LED displays "S-2".
Mémoire
f.Turn the " ", "5:40" displays.
g. Press " ", "PL5" displays.
The second stage is finished.
h. Press " " to save the set programme.
Départ
11. User Option Mode
This allows the user choose among various ways for the oven to operate.
1) Open the oven door and press "
this mode.
2) LED displays "OP: - -".
3) Turn the " " to choose related mode setting.
For example: to set the voice of the buzzer to medium. Turn the "
"OP:22" displays. If you want to change, keep turning "
"OP:20", " OP:21"," OP : 22 ""OP:23"
4) Press " " to save the current setting. After saved, "OP: - -" display again.
Départ
5) During setting process, press "
enter Ready Mode.
6) If " " button not pressed at the last step, the program cannot be saved but stay
Départ
at previous way.
" for 5 seconds, LED displays "ProG".
Mémoire
" for 5 seconds. The buzzer sounds once and enter
, "OP:20" .....in cycle.
Arrêt
Annulation
" to set the second stage.
Mémoire
", "S-2" or "S-3" displays.
Mémoire
", LED displays
" to enter Door Open Mode. Close the door will
"to " 2 ", press "
Départ
35
EN
"