CONTINENTAL EDISON CEMO25FAR Guide D'utilisation page 34

9. Programming Mode
This mode allows the user to assign cook times and power levels to the once touche button .
1) Open the door and press "
Programming Mode.
2) "ProG" displays.
3) Turn the "
for 2 seconds.Then turn the "
4) Press
" ","
LED will display the related power. If the same button pressed twice, the power
will change to full power. If no power chosen, full power is default.
5) After setting the time and power, press "
When the program saved, "ProG" displays.
6) If all the cooking time exceeds the MAX.time User Option 7, when press
" " to save the program, the buzzer will sound three times briefly to tell you the time is
Départ
no use. And then LED turn back to show "ProG". The time set before will be no change.
7) Close the door, the oven will turn back to Ready Mode.
The program that not saved will be lost. If there is program saved as memory procedure,
choose the related number and press "
If no saved program, the buzzer will alarm when choosing the number and it will not
work.
If press "
Mode.
EN
For example: set the program as memory cooking Program; Power level PL7 and cooking
time is 1 minute and 25 seconds.
Step1: In waiting state, press number button "
Step 2: Turn the "
Step 3: Turn the "
Step 4: Press "
Step 5: Press "
Départ
and press "
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the aboved steps.
Arrêt
3. If press "
Annulation
no use.
34
" for 5 seconds, the buzzer will sound once and enter to
Mémoire
" to choose one number for the program, the LED will display the number
" to choose the cooking time.
"," " or "
Arrêt
" button during setting process, the oven turn to Door Open
Annulation
" to choose "3", the program will be saved in "3".
"to input the desired cooking time 1:25 .
" button," PL7" displays.
" to save. When use the program next time, just choose "3",
",the related program will start.
Départ
" at the last step, it will turn back to Ready Mode. The setting will be
to input the power level.
"
", the cooking program will be saved.
Départ
", the saved program will start.
Départ
" for 5 seconds, "ProG" displays.
Mémoire