glass 1989 AZULEJO Notice D'installation page 9

INTRODUCTION
The following manual describes the systems and methods to be
used to ensure the product is installed properly by the installers;
it also features notes, warnings and routine maintenance
instructions for users.
The product is not dangerous for the end user if installed, used
and maintained in accordance with the instructions provided
by the manufacturer and on condition that the electrical and
mechanical parts are kept in perfect working order.
For this reason the instructions provided in this manual must be
meticulously followed.
READ THE INSTRUCTIONS CONTAINED IN THE FOLLOWING
MANUAL CAREFULLY BEFORE PROCEEDING WITH THE
INSTALLATION AND USE.
The supporting structure is highly resistant.
SYMBOLS USED
IN THIS MANUAL
symbols described below are used in this installation manual
and on certain parts of the product itself.
CONVENTIONAL SYMBOLS AND THEIR MEANING.
WARNING:
GENERAL DANGER.
Warn user that, if the described operation is not performed
observing safety regulations, there is a risk of physical injury.
NOTE.
Inform the personnel involved - information that, if not observed,
may lead to minor injuries to people or damage to the product.
WARNINGS.
Inform the personnel involved -important information.
HYDRAULIC INSTALLER.
A skilled technician capable to install the product under normal
conditions and carry out all adjustments, maintenance and
repair jobs on mechanical parts as necessary. The technician is
not authorised to work on live electrical systems.
WARNING
Inform features present only in some versions of the products.
OPTIONAL
Items present only if ordered.
CONSUMPTION MATERIAL
Items not provided by the manufacturer.
SAFETY REGULATIONS
• Before installing the product, make sure that the area
where it will be installed has the required technological
prearrangements.
You must also make sure that the walls and/or floor, on which
the product will be placed up against/installed, are fully tiled
for the entire extension of the product.
ENGLISH
• Product maintenance and setup must be performed exclusively
by specialised service personnel only.
• Please note that after every maintenance or adjustment
operation, the inspection and protection parts must be put
back in place before using the product.
• Due to its weight and size, the appliance must be assembled
installed by more than one person.
• Do not tamper,disable or disconnect the product devices.
• Do not, under any circumstances, create by-passes for uses
other than those established and permitted by the product.
• Do not remove or tamper with the inspection panels and do
not remove or conceal the product identification labels.
• Installation of electrical devices (sockets, switches, lamps,
etc.) inside the bathroom where the appliance is to be installed
must be in compliance with current regulations.
• It is absolutely forbidden to use any type of electrical appliance
inside or next to the product during use.
WARNING.
Do not use acetic silicone.
• Read the instructions supplied with the bottle to make sure
that the silicone is not acetic.
• If you need to replace any parts, contact your nearest service
centre and use original spare parts only.
• At the end of the product's life, do not abandon it in the
environment; contact a disposal firm.
WARNING.
The manufacturer declines all responsibility:
• If the installation and maintenance instructions contained
herein are not complied with.
• If the product is not used or installed in compliance with the
existing standards of the installed country.
• If the special maintenance is not carried out by qualified
personnel.
The label with the serial number/identification is found on
the package (Ord. cliente: XXXXXXXXXXXXXXXXXXXX /
Ord. prod: XXXXXX)
Serial number to be used every time an intervention is
requested.
Fig.A
Ord. cliente: XXXXXXXXXXXXXXXXXXXX
Ord. prod: XXXXXX
WARNING.
• Read the manual carefully in all its parts before using the
product.
• Keep this manual for further consultation.
• The manual is intended for different models and versions, so
the product may look different from the manual illustrations.
However the instructions remain unchanged.
• The company reserves the right to make any changes
considered suitable without notice or replacement.
• This product is intended only for the use for which it has been
designed. The manufacturer is not responsible for any damage
caused by improper usage.
• Ensure that the floor around the product is always dry and
clean, to avoid slips or falls entering or editing the product
itself.
9
Ord. cliente: 00000000000000000000 Ord. cliente: 00000000000000000000
Prodotto: GFP0003T50LM Prodotto: GFP0003T50LM
Ord. prod: Qtà. Pack.nr. Ord. prod:
638671 001 638671
1/1
GFP0003T50LM: FLUIDA LATERALE 80 CMSX GFP0003T50LM:
Assieme: FLUIDA LATERALE 80 CMSX Assieme:
000000 000 000000
000000 000000
Cliente: Nr. Ord: Riga Ord Cliente:
1
Qtà. Tipo Or.
XX
Vostro ordine numero: Provincia di destinazione: Vostro ordine numero:
XX
Qtà. Pack.nr.
001
1/1
FLUIDA LATERALE 80 CMSX
FLUIDA LATERALE 80 CMSX
000
Nr. Ord: Riga Ord
1
Qtà. Tipo Or.
XX
Provincia di destinazione:
XX