English | 17 - Bosch PBH 2800 RE Mode D'emploi

OBJ_BUCH-318-001.book Page 17 Monday, April 23, 2007 12:20 PM
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool's operation. If dam-
aged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous situ-
ation.
5) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Machine-specific
Safety Warnings
Wear hearing protection. Exposure to noise can
cause hearing loss.
Always use the auxiliary handle supplied with
the machine. Loss of control can cause personal
injury.
Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage or may
cause an electric shock.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more
secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive. Exam-
ple: Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip extrac-
tion when connectable.
1 619 929 781 • 23.4.07
Keep your workplace clean. Blends of materials
are particularly dangerous. Dust from light alloys
can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
working. Damaged cables increase the risk of an
electric shock.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Intended Use
The machine is intended for hammer drilling in con-
crete, brick and stone, as well as for light chiselling
work. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic. Machines with elec-
tronic control and right/left rotation are also suitable for
screwdriving and thread cutting.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Quick change keyless chuck (PBH 3000-2 FRE)
2 SDS-plus quick change chuck (PBH 3000-2 FRE)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck
(PBH 3000-2 FRE)
7 Lock-on button for On/Off switch
8 On/Off switch
9 Thumbwheel for speed preselection
10 Rotational direction switch
11 Release button for mode selector switch
12 Mode selector switch
13 Gear selector (PBH 3000-2 FRE)
14 Release button for gear selector
(PBH 3000-2 FRE)
15 Button for depth stop adjustment
16 Wing bolt for adjustment of auxiliary handle
17 Auxiliary handle
18 Depth stop

English | 17