Brandt BFL484YNW Guide D'installation Et D'utilisation page 28

①
Special flange
self-tapping screws
②
Earth wire
③Upper hinge part
Note: Please hold the door by hand
during step 4 to prevent door dropping.
5. Remove the door and place it on a
smooth surface with its panel upwards.
Lever part① and part④ ,then loose
ccc
screws② , as shown in the picture.
Change handle③to the right side, then
install screws② , part① and part④ in
turn. Loose screws⑦ , detach part⑥
and part⑤ , turn part ⑥ over and then
install part⑤ and part⑥ to the left side
with screws⑦.
vvv
ccc
XXXXXXXXXXXXXXXXXXXXXXXXX
25
ccc