Brandt BFL484YNW Guide D'installation Et D'utilisation page 25

Make sure that the plug is not
●
squashed or damaged. Otherwise, it
may cause short circuit, electric
shock or overheat and even cause a
fire.
Do not insert the mains plug if the
●
socket is loose, there is a risk of
electric shock or fire.
● Switch off the appliance and
disconnect it from the mains power
before you clean or move it.
Never unplug the appliance by
●
pulling on the electrical cord. Always
grip the plug firmly and pull straight
out from the socket to prevent
damaging the power cord.
Do not operate the appliance
●
without the light cover of interior
lighting.
Any electrical component must be
●
replaced or repaired by a qualified
electrician or authorized service
e n g i n e e r. O n l y g e n u i n e s p a r e s
should be used.
Do not use electrical appliances
●
such as ice cream makers inside the
food storage compartments of the
appliance, unless they are approved
by the manufacturer.
● Do not look direct into the LED
light located in the refrigerator
c o m p a r t m e n t w i t h o p t i c a l
instruments to avoid eye injuries. If
it is not functioning correctly, consult
a qualified, registered electrician or
replace it in accordance with the
"cleaning and care" chapter.
XXXXXXXXXXXXXXXXXXXXXXXXX
22
Refrigerant
The refrigerant isobutene (R600a) is
contained within the refrigerant
circuit of the appliance, a natural
g a s w i t h a h i g h
environmental compatibility, which
is nevertheless flammable. During
transportation and installation of the
appliance, ensure that none of the
components of the refrigerant circuit
becomes damaged.
T h e r e f r i g e r a n t ( R 6 0 0 a ) i s
flammable.
Caution: risk of fire
● Don't store products which contain
flammable propellants(e.g. spray
cans ) or explosive substances in
the appliance.
Should the refrigerant circuit be
damaged:
● Avoid opening flames (candles,
lamps etc.) and sources of ignition.
Thoroughly ventilate the room in
●
which the appliance is situated.
l e v e l o f