Panasonic Technics SL-G700 Manuel D'utilisation page 10

Control reference guide
This unit (rear)
01 Analogue audio output terminals
(ANALOG OUT)
• You can connect the pre-amplifier which
has the unbalanced input terminals, etc.
with analogue audio cable (supplied) to
output the analogue audio signals.
• You can connect the pre-amplifier which
has the balanced input terminals, etc. with
XLR cable (not supplied).
02 Wireless LAN antenna
( 14)
03 Optical digital output terminal (OPT)
You can connect a digital audio output
device such as D/A converter, etc. with
optical digital audio cable (not supplied) and
play back music.
04 Coaxial digital output terminal (COAX)
You can connect a digital audio output
device such as D/A converter, etc. with
coaxial digital cable (not supplied) and play
back music.
05 Optical digital input terminal (OPT)
You can connect a digital audio output
device with optical digital audio cable (not
supplied) and play back music.
• The digital audio input terminals of this unit
can only detect the following linear PCM
signals. For details, refer to the operating
instructions of the connected device.
- Sampling frequency:
32/44.1/48/88.2/96 kHz
- Number of quantisation bits:
16/24 bit
10
(10)
(Continued)
06 Coaxial digital input terminal (COAX)
You can connect a digital audio output
device with coaxial digital cable (not
supplied) to this unit and play back music.
• The digital audio input terminals of this unit
07 Product identification marking
• The model number is indicated.
08 LAN terminal
( 13)
09 USB-A terminal (USB Rear)
(DC 5 V
You can connect a USB HDD to the unit and
play back music stored on the USB HDD.
( 18)
10 System terminal (CONTROL)
11 AC IN terminal (
( 12)
can only detect the following linear PCM
signals. For details, refer to the operating
instructions of the connected device.
- Sampling frequency:
32/44.1/48/88.2/96/176.4/192 kHz
- Number of quantisation bits:
16/24 bit
1 A)
)