Safety Instructions - auna 10032586 Mode D'emploi

SAFETY INSTRUCTIONS

CAUTION
This device is a laser product of class 1.
The use of controls or modifications not recommended
by the manufacturer may expose you to dangerous laser
radiation.
Do not open the unit cover or attempt to repair the unit
yourself.
Refer servicing and repair to qualified personnel.
IMPORTANT INFORMATION
• Only using furniture that can safely support the products.
• Ensure the product is not hanging over the edge of the supporting
furniture.
• Do not place the product on a high furniture without securing both the
furniture and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
General safety precaution
• This product must be positioned in a sufficiently stable location. It can
be potentially hazardous due to falling when mounted and can cause
injury, particularly to children, if positioned incorrectly.
• Do not use a damaged power cord, plug or loose outlet. Doing so may
cause an electric shock.
• Do not plug several devices into the same outlet. Doing so may cause
the outlet to overheat and start a fire. Make sure the outlet is readily
accessible during operation of the equipment.
• Do not bend, twist or kink the power cord excessively.
• The device must not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, may be placed on the product. Use
only in a dry location.
• Do not run the power cord near heat-producing appliances such as
radiators, stoves or irons. The excessive heat could melt the insulation
and expose live wires, resulting in fire or electric shock.
• No naked flame source, such as candles, should be placed on the
product.
• Do not allow anything to rest on or roll over the power cord. Doing so
may cause fire or electric shock.
• Do not run the power cord near heat-producing appliances such as
radiators, stoves or irons. The excessive heat could melt the insulation
and expose live wires, resulting in fire or electric shock.
EN
45