REMIS REMIfront IV-Transit Custom Notice De Montage page 25

Step 5: (Assembly of side system)
B52
B53
B54
B55
B52:
Place side part against the door in such a way that it is
fl ush with the door sheet.
B53:
6 fastening points are to be pre-drilled with Ø2.5mm.
B54+B55:
Now screw the side system tight. For this purpose, fi rst
screw the system on at the bottom with the black screws
Ø3.9x13mm. At the top, push the black rubber washers
onto the screwing point between door sheet and side sy-
stem and screw on with the silver screws Ø3.5x13mm.
US/GB
25/40